Polyurea 5000 Clear High Performance Coating  (1.25 Gallon Kit)
Brand: Arizona Polymer Flooring
Product Code: PA5000C-A
Availability: In Stock

A 92% solids hybrid material that gives high gloss, chemical and abrasion resistant coatings without solvent odor. May be applied up to 16 mils in a single application.*

Polyurea 5000 Clear High Performance Coating: Features and Usage

Polyurea 5000 is a two component, ultra high solids, aliphatic polyurea/polyaspartic hybrid. Unique new resin chemistry has provided the raw materials to formulate this coating that gives the desirable properties of polyester-polyurethane materials with greatly reduced odor and less film thickness limitations. Polyurea 5000 is a low viscosity, easy to handle product that gives very high gloss finishes that are both hard and abrasion resistant. This material releases soil easily and has excellent resistance to a broad range of chemicals. Unlike conventional polyurea materials, Polyurea 5000 has enough work time to be applied by brush and roller. It is available in both a regular cure and a fast cure version for use in rapid turnaround projects. The fast cure material may be used at temperatures as low as 20ºF. For exterior applications, a UV stabilizer package is incorporated to ensure long-term gloss retention and resistance to yellowing.

Polyurea 5000 was developed as a high performance top coat in various protective coatings and seamless flooring applications. Because of its low solvent content, it may be applied heavier in one coat than conventional solvent or water-based polyurethanes. Applications that required two or more top coats can now be done in a single application resulting in savings of both time and labor. Polyurea 5000 is ideally suited for use as a finish coat in color chip and color quartz flooring, automotive repair facilities, aircraft hangars, clean rooms and various types of decorative architectural concrete applications.

Chemical Composition

Hydroxyl functional polyaspartic and amine crosslinked with aliphatic isocyanate.




  • Do not use on unprimed substrates.
  • Do not allow to puddle. Film thickness must not exceed 16 mils.


*This coating is available with a UV absorber package which should be purchased separately and added to the product when used in exterior applications.
Product Details
There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad Good